Extron electronics DMP 128 Plus - DMP 128 Plus Voip Web Page; Accessing the Embedded Voip Web Page

DMP 128 Plus • Web Pages 167
7
Passwords Panel — Click the Set button in the Passwords panel to open the
Passwords dialog box which allows users to set admin and user passwords. Enter and
confirm a password, then click Apply to apply the password.
NOTE: An administrator password must be applied before a user password can be
applied.
Figure 203. Passwords Dialog Box
DMP 128 Plus VoIP Web Page
Accessing the Embedded VoIP Web Page
1. From a Web browser, enter the device IP address into the address field followed by
/www/voip.html.
NOTE: If the local system administrators have not changed the IP address, and
the device has not been assigned an IP address via DHCP, the default address is
192.168.254.254.
2. Press <Enter>.
3. If a username and password have been set to access the basic DMP 128 Plus Web
page, the same username and password are required to access the VoIP Web page.
figure 203. Passwords Dialog Box