DMP 128 Plus • Configuration Tools 90
Passwords
The Passwords tab allows the user to create or edit user and administrator passwords. An
administrator password must be created in order to create a user password. The checkbox
to the left of the password type (Admin or User) must be checked before creating or editing
passwords. Click Apply to save the changes.
NOTE: Passwords only apply to IP connections and can be up to 12 characters in
length.
Figure 155. Passwords Tab in Device Settings Dialog Box
Serial Settings
The Serial Settings tab allows users to change the baud rate of the rear panel RS-232
port. Click Apply to save the changes.
NOTE: The recommended baud rate for the DMP 128 Plus is 38400.
Figure 156. Serial Settings Tab in Device Settings Dialog Box
figure 155. Passwords Tab in Device Settings Dialog Box
figure 156. Serial Settings Tab in Device Settings Dialog Box
To Next Page
Loading...
