DMP 128 Plus • Configuration Tools 87
9. An installation status dialog box opens that displays the completion status of firmware
download and installation.
10. When the firmware is installed, the Firmware Upgrade dialog box displays that the
installation is complete and the install location of the firmware file. By default, firmware is
installed in:
Program Files > Extron > Firmware > DMP_128_Plus > vx.xx
If the View Firmware Release Notes checkbox is checked (see figure 151,
9
below), a PDF of the firmware release notes opens automatically. The box is checked by
default.
Click Finish to close the dialog box (
¢
).
Figure 151. Firmware Installed Dialog Box
Organize Building Blocks
Extron building blocks are a quick configuration tool that can significantly reduce
configuration time. A building block is a collection of processor and gain settings for an input
or output processing chain. Building blocks have been built by Extron based on extensive
use and testing with each intended application or specific device. The Organize Building
Blocks dialog box allows users to organize building blocks to their preference, import new
building blocks, export existing building blocks, delete building blocks, and restore default
building blocks that may have been deleted by the user. Building blocks in the Organize
Building Blocks dialog are organized into folders for easily locating building blocks for a
multitude of applications.
Select Tools > Organize Building Blocks to open the Organize Building Blocks
dialog box.
figure 151. Firmware Installed Dialog Box
To Next Page
Loading...
