Extron electronics DMP 128 Plus - Aux Inputs; Renaming an Aux Input

DMP 128 Plus • DSP Configurator Software 43
6
Cancel Button — Reverts any changes made to the contained parameters back to
their states when the current instance of the Pre-mixer Gain dialog box was opened
and closes the dialog box.
7
Pre-mixer Gain Help Button — Opens the Pre-mixer Gain topic of the
DSPConfiguratorHelp file for further assistance in understanding operating the
Pre-mixer Gain dialog.
Aux Inputs
Eight Aux inputs are available with processing. These inputs can be assigned as one of the
following:
• Player inputs that play audio files stored in the DMP 128 Plus internal memory (see
Player Input on the next page)
• USB inputs that receive audio via the rear panel USB audio port (see USB Input on
page45)
• VoIP lines for use with a VoIP network (V models only, see VoIP Input on page45)
Figure 72. Aux Inputs Panel
Renaming an Aux Input
1. Click the input name field.
Figure 73. Aux Input Name Field
2. Delete or highlight the text and type the desired name.
Figure 74. New Aux Input Name
3. Press the <Enter> key or navigate away from the field to confirm and apply the new
name. Press the <Down Arrow> key to navigate to and highlight the next name field.
Figure 75. Renamed Aux Input
NOTE: Follow the same procedure to edit an Aux input name.
figure 72. Aux Inputs Panel
figure 73. Aux Input Name Field
figure 74. New Aux Input Name
figure 75. Renamed Aux Input