Extron electronics DMP 128 Plus - Window; Help

DMP 128 Plus • DSP Configurator Software 16
¤
Device Settings — Opens the Device Settings dialog box to edit date and time, IP
address, DHCP status, and other settings (see Device Settings on page89).
¥
Options – Opens the Options dialog box to configure DSP Configurator appearance,
default settings, DSP value defaults, and so on (see Options on page93).
¦
Network Audio Control — Opens the Dante Controller application by Audinate for
routing audio over a Dante network (see Dante Controller on page107).
§
Expansion Bus – Contains a submenu to assign a DMP 128 Plus as a Primary or
Secondary unit. On DMP 128 Plus AT models, the submenu can assign the expansion
ports to AT channels 33-48 (see Expansion Bus on page93).
Window
Figure 20. Window Menu
1
Cascade — Organizes windows by cascading them in the same order they were
opened.
2
Close All Windows — Closes all open windows, leaving only the main workspace
visible. When all windows are closed, changes to parameters in the open windows are
saved before the window is closed.
3
List of Open Windows — Below the dividing line is a list of all open windows. Select
a window from the list to bring it into focus and to the forefront of the workspace.
Windows appear in the order they were opened.
Help
Figure 21. Help Menu
1
Contents — Opens the DSP Configurator Help file where detailed information about
DSP Configurator can be found.
2
Search — Opens the DSP Configurator Help file with the Search field in focus.
3
About — Opens a window displaying software version number, copyright information,
and part number for the installed copy of DSP Configurator. Click the Details button
for a list of advanced details, such as build number.
figure 20. Window Menu
figure 21. Help Menu