Extron electronics DMP 128 Plus - Managing Devices in Device Manager

DMP 128 Plus • Configuration Tools 82
Managing Devices in Device Manager
To add a device:
1. Click Tools > Device Manager to open the Device Manager dialog box.
2. Click the Add Device button (see figure 143,
1
below).
Figure 143. Adding a Device
3. From the DSP Configurator splash screen drop-down, select the device to be added to
Device Manager (see figure 144,
2
below). Select Connect... to open the Connect
to device... dialog box and directly connect with a device. When connecting directly,
DSP Configurator performs a pull of the newly connected device configuration.
4. Click OK (
3
).
Figure 144. Selecting a Device to be Added
figure 143. Adding a Device
figure 144. Selecting a Device to be Added