Extron electronics DMP 128 Plus - Page 157

DMP 128 Plus • Remote Control and Configuration 149
Command ASCII command
(host to device)
Response
(device to host)
Additional description
Unsolicited Responses
Busy
VoipBusyX!,X@]
Rejected
VoipRejectedX!,X@]
Unreachable
VoipUnreachableX!,
X@]
Terminated
VoipTerminatedX!,
X@]
Incoming
VoipIncomingX!,
X@,X1),X2#,X1!]
Registration status
VoipRSX!,X1@]
Line Status
VoipLSX!,X1$,X1$,
X1$,X1$,X1$,X1$,
X1$,X1$]
Each X1$ entry represents
an appearance of the line.
Line Status Queries (get only)
Registration status
ERSX!VOIP} VoipRSX!,X1@]
Line status
ELSX!,X@VOIP} VoipLSX!,X@,X1$]
Line status (without
index)
ELSX!VOIP} VoipLSX!,X1$,X1$,
X1$,X1$,X1$,X1$,
X1$,X1$]
Each X1$ entry represents
an appearance of the line.
Caller name
ENAMEX!,X@VOIP} VoipNAMEX!,X@,X1),
X2#]
Duration
EDURX!,X@VOIP} VoipDURX!,X@,X1^]
Codec
ECDX!,X@VOIP} VoipCDX!,X@,X1&]
Jitter Rx
EJRX!,X@VOIP} VoipJRX!,X@,X1*,
X1(,X2@]
Line Extension
ELEX!VOIP} VoipLEX!,X2#,X1)]
NOTES:
X!
= Line number 1 - 8
X@
= Appearance number 1 - 8 (where 1 is the originating two-party call)
X1)
= Display name Any commas returned will be displayed as hyphens (-)
X1!
= Timestamp Example: Date: Thu, 08 Sep 2017 16:24:35 GMT
X1$
= Call status 0 = None, 1 = Inactive, 2 = Active, 3 = On Hold, 4 = Incoming,
5 = Outgoing
X1^
= Duration
HH:MM:SS
X1&
= Codec name Alphanumeric characters only
X1*
= Jitter in milliseconds
X1(
= Packet drop count
X2@
= Total packet count
X2#
= Extension number Valid characters are 0 - 9, *, #