Extron electronics DMP 128 Plus - Page 180

DMP 128 Plus • Web Pages 172
3
TSL Mode Drop-Down — Choose Always Allow or Always Verify TLS modes.
NOTE: This option is only available when TLS is selected as the transport protocol.
4
Local Mode Drop-Down — Choose a default local certificate or upload a custom local
certificate to the DMP 128 Plus. When the default certificate is selected, click Generate
to force the DMP 128 Plus to self-generate a new local certificate and private key.
NOTE: Certificates and private keys must be in the Privacy Enhanced Mail (PEM)
format. The certificate filename cannot be longer than 32 characters, including the
.pem extension.
5
Local Cert — If Local Mode is set to Upload, click the Browse button to locate a
certificate on the host PC. Click Import to commit this certificate to the DMP 128 Plus.
Click Export to save the current local certificate to the default download directory of the
Web browser on the host PC.
6
Private Key — If Local Mode is set to Upload, click the Browse button to locate a
private key on the host PC. Click Import to commit this key to the DMP 128 Plus. Click
Export to save the current private key to the default download directory of the Web
browser on the host PC.
7
Server Certs — Displays up to eight server certificates that can be stored on the
DMP128Plus at any one time. The following buttons are also available.
• Add Cert — Click to add a server certificate to the system.
• Add CA — Click to add a Certificate Authority certificate to the system.
• Remove — Highlight a listed certificate and click this button to remove it from the
system.
8
Apply Button — Commits changes made to the transport protocol configuration to the
DMP 128 Plus.