Extron electronics DTP CrossPoint 84 - Page 86

DTP CrossPoint 84 Series Matrix Switchers • Matrix Software 78
6. Start the Product Configuration Software and connect to the unit (see Starting the
Program, steps 1, 2, 3, and 5, starting on page 75).
7. Click Tools > Update firmware. The software asks you to confirm that you want to
continue the update (see figure39).
11
1111
1111
1111
1111
22
2222
2222
2222
2222
33
3333
3333
3333
3333
44
4444
4444
4444
4444
33
3333
3333
3333
3333
Figure 39. Updating Firmware
8. Click Continue (
1
). The Product Configuration Software disconnects itself from the
unit and calls the Firmware Loader utility in the background. The Update Firmware
dialog box appears.
9. Click Browse (
2
). The Open dialog box opens.
10. Navigate to the folder where you saved the firmware upgrade file (see figure 39, above).
Select the file and click Open (
3
). The Update Firmware dialog box returns to the top.
35