FAAC A1400 AIR RDT - 2.4 Technical Specifications

A1400 AIR RDT 14 532119 04 - Rev. C
Translation of the original instructions
ENGLISH
2.4 TECHNICAL SPECIFICATIONS
7 Technical specifications
MODEL A1400 AIR RDT single leaf A1400 AIR RDT double leaf
Length * [mm] from 1750 to 4600 from 2200 to 6100
Depth * [mm] 234 234
Total depth with self-supporting beam * [mm] 289 289
Height * [mm] 100 100
Weight** [kg] MIN. 25 - MAX 43 MIN. 31 - MAX. 55
No. of leaves 2 4
MAX weight of one leaf *** The weight depends on the leaf dimensions:
L [m] Pmax [Kg]
≤ 1.4 110+110
1.6 90+90
1.7 75+75
1.8 65+65
2.0 60+60
2.2 63+63
2.4 70+70
2.6 80+80
2.8 90+90
3.0 110+110
The weight is independent of leaf dimen-
sions:
60+60+60+60 [Kg]
Passage opening (Vp) [mm] from 1100 to 3000 from 1400 to 3000
Beam length [mm] Vp x 1.5 +100 Vp x 1.5 +100
Maximum framed leaf thickness [mm] 65 65
Power supply voltage 230 V~ (+6% -10% ) 50 Hz 230 V~(+6% -10% ) 50 Hz
MAX Absorbed power [W] 140 140
Use frequency 100 % 100 %
Main motor (with encoder) powered at 36V powered at 36V
Auxiliary motor (without encoder) powered at 36V powered at 36V
Max. accessories load 1A, 24V (excluding SDK EVO) 1A, 24V (excluding SDK EVO)
Time/date backup battery Lithium CR2032 3V Lithium CR2032 3V
Motion backup battery NiMh 24V 1800mAh NiMh 24V 1800mAh
Traction by toothed belt by toothed belt
Opening/closing speed adjustment (empty) [cm/s] 10... 75 20... 150
Partial opening adjustment 5%... 95% of total opening 5%... 95% of total opening
Pause time adjustment [s] 0... 30 0... 30
Night pause time adjustment [s] 0... 240 0... 240
Anti-crushing device in opening/closing in opening/closing
Protection sensors monitoring (EN 16005:2012) can be bypassed can be bypassed
Function Energy Saving can be enabled can be enabled
Drive Low Energy can be enabled can be enabled
Operating ambient temperature [°C] -20... +55 -20... +55
Automation protection degree IP 23 (internal use) IP 23 (internal use)
* The dimensions and weight of the automation are specified excluding carriage and leaf overall dimensions, which are customisable
** For the specifications of weights in relation to automation length, see 28.
*** The leaf weight is variable non proportional to L leaf dimension. This is connected to the opening speed which must remain constant regardless of leaf weight and size,
with reference to standard EN 16005:2012.