FAAC A1400 AIR RDT - 18.2 SDK EVO Switching On and Use (Continued); 18.3 SDK EVO Home Page Overview; 18.4 Reset and Block;Release SDK EVO; 18.5 Password Entry Procedure

A1400 AIR RDT 85 532119 04 - Rev. C
HOME PAGE
93
PASSWORD
0000
ESC OK
14:30
Translation of the original instructions
ENGLISH
18.3 HOME PAGE
The 4 buttons under the display activate the command represented
by the icon above them 93.
18.4 RESET  BLOCK/RELEASE SDKEVO
On the HOME PAGE, Block/Release SDK EVO or Reset the board by
pressing the indicated 2 buttons simultaneously for 5 s:
5”
5”
RESET
5”
5”
18.5 PASSWORD
To perform some commands the 4-digit PASSWORD must be
entered.
- select the first digits with buttons
↑
↓
- confirm via the OK button and it moves on to the next digit
- Once the 4 digits are completed, the password is recognised by
the device as OPERATOR or INSTALLER.

The factory-set password is: 0000
****
ESC
↑
↓
OK
leave and go back to
the HOME PAGE
confirm the figure
select figure
ENTER PASSWORD
- In case of UNRECOGNISED PASSWORD:
- the command is not executed
- the display shows “INCORRECT PASSWORD”
- press OK to go back to the HOME PAGE.
PASSWORD
INCORRECT PASSWORD
ESC OK
Functions accessible with PASSWORD
OPERATOR



 *
INSTALLER




* Some functions are reserved to the installer
set NIGHTTIME
mode
set MANUAL mode go to FUNCTION menu
go to SELECTION
menu
- name of the door
- day and date
- operating mode
- time
SDK EVO blocked
current indications
Factory Password
timer active
A1400 AIR RDT
THUR 20/03/14
AUTO BIDIR TOTAL