FAAC A1400 AIR RDT - Mount the Side Profiles; Install the Casing Brackets

A1400 AIR RDT 47 532119 04 - Rev. C
61
62
2
6
6
Nm


2
2
6
2
Nm
Translation of the original instructions
ENGLISH
11.4 MOUNT THE SIDE PROFILES
!
The side covers are a necessary element to assure stiffness and resist-
ance of the overall telescopic profile structure. These features cannot
be assured in the event of omitted assembly.
1. Arrange 3 plates on the support profile 61-

.
2. Apply the sides to the ends of the support profile.
3. Fasten each side profile with the 3 screws provided 61-

.
11.5 INSTALL THE CASING BRACKETS
1. Mount the 3 brackets and fasten them with the screws provided
62-

.
