FAAC A1400 AIR RDT - 9.6 Telescopic Profile Assembly

A1400 AIR RDT 35 532119 04 - Rev. C
50
250
200
50







41
42
3
6
6
Nm
Translation of the original instructions
ENGLISH
next fit the external carriage unit in the side 41.
9.6 TELESCOPIC PROFILE ASSEMBLY
Three 2-metre rods are used to assemble the telescopic profile, which
will be aligned and cut to measure matching the head section length
Lt.
1. Insert the 3 rods in the profile from the 200mm side 42- .
The end part will be 50mm 42-
 .
2. After that correctly position the rods, set the telescopic profile
abutting with the main profile and fix it with the hex screws with
washer 42-
 .