FAAC A1400 AIR RDT - 8.3 Self-Supporting Automation Fastening (Continued)

A1400 AIR RDT 31 532119 04 - Rev. C
30
31 32
33
1
1
3
4
5
6
Translation of the original instructions
ENGLISH
8.4 MOUNT THE TRANSOM
OPTIONAL)

The optional transom is provided in the event of self-supporting
head section.
1. Insert the transom leaf in the opening of the self-supporting
profile 30.
2. Keep the leaf lifted to insert the profiles at a regular distance 31.
3. Lower the leaf onto the profiles 32.
4. Fasten a central tie rod (not provided) 33.
!
Use steel tie rods suitable to withstand a 600 kg load (the contact
surface of the cable with the self-supporting profile must be at least
70 mm
2
)* 29.

The number of required tie rods depends on profile length: arrange
one tie rod every 2500 mm.

Tie rod not supplied.
* minimum 70 mm
2