FAAC A1400 AIR RDT - Page 17

A1400 AIR RDT 17 532119 04 - Rev. C
Translation of the original instructions
ENGLISH
Motor block and Internal release - OPTIONAL
It acts directly on Motor_1 mechanically locking it to maintain leaf
position.
Supplied with internal release device which allows emergency open-
ing to be performed in case of need.
Ready for installing external release.
Monitoring - OPTIONAL
The magnetic monitoring sensor detects door status: closed/not
closed. It is fitted with connector for connecting a relay (e.g. to con-
nect an alarm system).
The monitoring micro switch on the motor block detects any mal-
function. It is ready to remotely activate a light or sound warning.
Motor block XM LOCK - OPTIONAL
It acts directly on Motor_1 mechanically locking it to maintain leaf
position.
SDK EVO - OPTIONAL
Programming and function selector device with display.
LKEVO - OPTIONAL
Programming and function selector device without display.
TK50 - Sliding shoes with bracket - OPTIONAL
For fastening to wall or fixed leaf (supplied in a PAIR).
TK50 - Swivel sliding shoes - OPTIONAL
For fastening to the floor (supplied in a PAIR).
TK20 - Sliding shoes with bracket - OPTIONAL
For fastening to fixed leaf (supplied in a PAIR).
Lower guide profile - OPTIONAL
To adapt the lower leaf profile to the sliding shoe.
Supplied in 3.0 m long rods.
Upper profile for connecting the leaf - (1 for each leaf) - OPTIONAL
Accessory to adapt the upper leaf profile to the carriage connections.
Supplied in 3.0 m long rods.
Brush strip for lower guide profile (H19 or H25) - OPTIONAL
Completes the floor guide system.
Glass leaf lower shoes - OPTIONAL
For glass leaf sliding.
Glass leaf gripper - OPTIONAL