FARGO electronics DTC510 - User Manual

345 pages

Save Page as PDF

To Next Page

DTC500 Series Card Printer/Encoders

User Guide (Rev. 5.0)

 DTC510 (Single-Sided Card Printer/Encoders)

 DTC515 (Single-Sided Card Printer/Encoders)

 DTC515-LC (Single-Sided Card Printer/Encoders)

 DTC520 (Dual-Sided Card Printer/Encoders)

 DTC525 (Dual-Sided Card Printer/Encoders)

 DTC525-LC (Dual-Sided Card Printer/Encoders)

Part Number: L000699

Main Page

Questions and Answers

J
Johnny WilliamsSep 1, 2025
What causes 'Invalid Print Ribbon' error on FARGO electronics DTC510 Printer?
- C
  Christopher LopezSep 1, 2025
  If your FARGO electronics Printer displays 'Invalid Print Ribbon', it indicates an unauthorized Ribbon. Install a valid, Fargo-authorized Ribbon and press RESUME to continue.
F
flloydSep 12, 2025
What does 'Flipper Alignment' mean on FARGO electronics DTC510?
- U
  umcleanSep 12, 2025
  If your FARGO electronics Printer displays 'Flipper Alignment', it indicates that the Printer is unable to align the Flipper table.
S
Stacy PetersAug 30, 2025
How to fix a 'Card Hopper Jam' on a FARGO electronics DTC510 Printer?
- C
  Craig GonzalezAug 31, 2025
  If your FARGO electronics Printer displays 'Card Hopper Jam', it indicates that the Card Hopper is unable to move from one hopper to the next. Clear any obstructions and close the hopper door.
J
Joel Bryan Jr.Sep 14, 2025
What does 'No MAG Encoder' mean on FARGO electronics DTC510?
- C
  Cheryl TurnerSep 14, 2025
  If your FARGO electronics Printer displays 'No MAG Encoder', it indicates that the Printer has received encoding data, but the Printer is not configured with this Encoder type.
Y
yrhodesSep 14, 2025
What does 'Hopper 2 Empty' mean on FARGO electronics DTC510?
- J
  Jessica JacksonSep 14, 2025
  If your FARGO electronics Printer displays 'Hopper 2 Empty', it means Card Hopper 2 has run out of cards.
B
Brian PhillipsSep 18, 2025
What does 'Head Voltage Error' mean on FARGO electronics Printer?
- J
  Jennifer WallSep 18, 2025
  If your FARGO electronics Printer displays 'Head Voltage Error', a hardware fault has prevented a correct setting of the Printhead voltage. A default value will be used.
C
Crystal CrawfordSep 23, 2025
What does 'RAM Memory Error' mean on FARGO electronics DTC510 Printer?
- J
  Joshua SmithSep 23, 2025
  If your FARGO electronics Printer displays 'RAM Memory Error', it indicates that the Printer's Memory Module is bad or not installed properly.
R
robertlloydAug 27, 2025
How do I fix 'No Ribbon Installed' on my FARGO electronics DTC510?
- D
  danielharrisAug 27, 2025
  If your FARGO electronics Printer displays 'No Ribbon Installed', it means that the Printer is trying to print with no print Ribbon installed. Install the proper print Ribbon and press RESUME to continue or CANCEL to reset the Printer.
E
erinsantosAug 26, 2025
What does it mean when my FARGO electronics DTC510 says 'Print Ribbon Low'?
- H
  hendrixhaleyAug 26, 2025
  If your FARGO electronics Printer displays 'Print Ribbon Low', it means that the print Ribbon will soon run out. If printing a large number of cards, replace the Ribbon now or monitor the Printer until the Ribbon is gone and install a new Ribbon.
G
Glenn Young DDSAug 25, 2025
Why does my FARGO electronics DTC510 Printer say 'Wrong Print Ribbon'?
- T
  Tonya PalmerAug 26, 2025
  If your FARGO electronics Printer displays 'Wrong Print Ribbon', it means that the print Ribbon installed in the Printer does not match the Ribbon type selected in the Printer driver.