Fimer PVS-175-TL - Commissioning Procedures

FIMER_PVS-175-TL A.1 Version_Product manual_EN_RevC-
F
103
Commissioning
ATTENTION – A Before proceeding with commissioning, make sure that you have carried
out all the checks and verifications indicated in the previous chapters.
ATTENTION – A This inverter can be powered both with AC or DC sources. In case
of DC source is used, make sure that irradiation is stable and adequate for the inverter
commissioning procedure to be completed.
ATTENTION – A At the first activation of the inverter the firmware version could be
syncronized between power module and wiring box. During this phase the LEDs “Power”
“Alarm” and “GFI” blinks together every 1 second. This process is absolutely normal and
must be completed without interruption. A switch-off of the system during this process could
cause serious damage to the inverter.
HOT SURFACE – C Do not place objects of any kind on the inverter during operation!
Do not touch the heat sink while the inverter is operating! Some parts may be very
hot and could cause burns.
Commissioning can be carried out in two different ways:
• Via FIMER Installer for Solar Inverters APP
Recommended mobile APP for commissioning a single inverter as well as a multi-inverter solar
plant.
• Via Web UI (access point wireless network)
Web User Interface enabling the parameters settings and to perform commissioning of a single
inverter (multi inverter support is not provided).
Recommended as alternative method for performing single inverter commissioning.
Commissioning via Installer for Solar Inverters mobile APP
“Installer for Solar Inverters” is the new advanced FIMER mobile APP that allows to simplify
commissioning, setting parameters and to make troubleshooting of FIMER string multi-inverters in
large scale solar plants.
Even in case of single inverter installation it can be consider the most suitable professional tool to be
used.
“Installer for Solar Inverters” mobile APP is available for mobile devices with an Android version of
6.0.1 or greather (iOS mobile devices support will come soon) and could be downloaded and installed
from Play Store.