Fimer PVS-175-TL - Registration Website and Admin Plus Token

FIMER_PVS-175-TL A.1 Version_Product manual_EN_RevC-
F
176
“Registration website” and “Admin Plus token”
In order to obtain the security token needed to obtain the “Admin
Plus” privileges in the web user interface, it is necessary to go
through the following stages:
Stage 1 - Collection of information relating to the inverter.
Collect the following information relating to each inverter for which you wish to have the security token:
• S/N - Serial number of the inverter. This information can be found on the product label giving the
identity details of the inverter.
The serial number consists of 6 digits (the last 6 in models with a label giving a 10-digit S/N).
• WK - Production week. This information can be found on the product label giving the identity details
of the inverter.
The production week consists of 4 figures, indicating the week (first 2 digits) and the year of
production (last 2 digits).
Stage 2 - Registration on https://registration.solar.fimer.com
• Go online and access https://registration.solar.fimer.com
• Set the desired language and click on the specific icon to start registration.
• Insert the personal data
requested and end the
registration stage.
• An email will be sent to the
email address used with a
link to complete the
registration process.
• Once the registration
process is over, a further
email will be sent with the
password to access the
website.
NOTE – D The security token obtained enables access also to the advanced “Installer”
mode present on the configuration software for inverters. The configuration software can
be downloaded in a specific section of the website https://registration.solar.fimer.com