Fimer PVS-175-TL - Residual Risks and Prevention

FIMER_PVS-175-TL A.1 Version_Product manual_EN_RevC-
F
14
Residual risks
ATTENTION – A Despite the warnings and safety systems, there are still some residual risks
that cannot be eliminated.
These risks are listed in the following table with some suggestions to prevent them:
Risk analysis and description Suggested remedy
Noise pollution due to installation in unsuitable
environments or where individuals routinely
work and/or animals dwell most of the time.
Reassess the environment or the place of
installation.
Adverse external weather conditions, water
seepage, low temperatures, high humidity, etc.
Maintain ambient conditions suitable for the
system.
Overheating of components (transformers,
accumulators, coils, etc. ) that could cause
burns. Restricted cooling slits or systems of the
equipment.
Use suitable PPE. Wait for the parts to cool
down before opening the inverter. Do not
restrict cooling openings or heatsinks.
Inadequate cleaning that could compromises
cooling and does not allow the reading of safety
labels.
Clean the equipment, labels and work
environment.
Stored energy in components that could
generate hazardous discharges.
Ensure that the components have
discharged their energy before working on
them.
Inadequate training of staff. Ask for supplementary courses.
Incomplete installation, equipment or its
components temporarily mounted.
Prevent unauthorized access to the
installation area. Use a sufficient number
employees and PPE.
Accidental disconnection of quick-fit connectors
with the equipment in operation, or wrong
connections that may generate electric arcs.
Prevent unauthorized access to the
installation area and lock out/tag out the
inverter before working on it.
Mismatched brand of quick-fit connectors that
may void the warranty and could cause
potential damage.
Use the same brand for the counterparts of
the quick-fit connectors installed on the
inverter.