EasyManua.ls Logo

Fimer PVS-175-TL - Installations with a High Level of Humidity

Fimer PVS-175-TL
185 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FIMER_PVS-175-TL A.1 Version_Product manual_EN_RevC-
F
59
NOTE – D All installations at altitudes exceeding 2000 metres are not recommended on the
basis of the criticalities indicated above.
Installations with a high level of humidity
ATTENTION – A Never open the inverter in the case of rain, snow or a level of humidity
>95%.
ATTENTION – A Always carefully seal all unused openings.
Even though the device is equipped with an anti-condensation valve, air with extremely high levels of
humidity can lead to the creation of condensation inside the inverter.
As the inverter is almost completely insulated from the outside, condensation can also form after
installation in certain weather conditions.

Table of Contents

Other manuals for Fimer PVS-175-TL

Related product manuals