FIMER_PVS-175-TL A.1 Version_Product manual_EN_RevC-
F
38
All products previously mentioned work together to allow solar power professional and site owners to
collaboratively manage solar power plants.
NOTE – D Please contact the FIMER tecnichal support for getting your own Plant Portfolio
Manager account (mainly for installers and plant administrators). Please get your Plant Viewer,
Plant Viewer for Mobile or Energy Viewer by accessing the website www.auroravision.net
and click on “Register with Plant Viewer” button (mainly for site owners).
Configurable relays
This inverter is equipped with two configurable switching relays (41), which can be used in different
operating configurations that can be set through the integrated web user interface. A typical example
of application is closing the contact when an alarm is triggered.
Remote switch-on/switch-off
This command can be used to switch off/switch on the inverter via an external (remote) command by
means the Remote ON/OFF terminal block (42).
This functionality must be enabled in the integrated web user interface.
When the functionality is active the switching on of the inverter, besides being dictated by the presence
of normal parameters which allow the inverter to be connected to the grid, also depends on the
external control for switching on/off.
Reactive power feed into the grid
This inverter is able to produce reactive power and can feed this power into the grid via the power
factor setting.
Power feeding modes may vary according to the country of installation and the local grid companies.
Limiting the active power fed into the grid
This inverter is able to limit the amount of active power fed into the grid to a desired and adjustable
value.
To Next Page
Loading...
