Maintenance Instructions
Seite/Page 160 - Kaptitel/Chapter 7: Maintenance Instructions 18.12.15
Fig. 7.17-3: Electric starter3. Pull off rubber cap.
4. Loosen hex nut with wrench with W.A.F. 13 mm and
remove the electric connections.
Fig. 7.17-4: Electric starter5. Loosen the lower attachment screw with a hex socket
wrench.
Fig. 7.17-5: ToolsTools needed:
01. Socket wrench with long and short extension and size
6 mm socket
To Next Page
Loading...
