Fischer Panda 18 - Installation of the Water Cooled Exhaust System; Fischer Panda Installation Kit - Exhaust System

Installation Instructions
18.12.15 Kapitel/Chapter 6: Installation Instructions - Seite/Page 69
6.7 Installation of the water cooled exhaust system
6.7.1 Fischer Panda installation kit - Exhaust System
Note:The following additional components will be required for
the specified installation. You can purchase them as an
installation kit or separately at Fischer Panda.
Fig. 6.7.1-1: WaterlockWaterlock
Fig. 6.7.1-2: Exhaust Water seperatorExhaust-Water-Seperator
Fig. 6.7.1-3: Through hull fitting without strainerThrough hull fitting without strainer
Fig. 6.7.1-4: AdapterAdapter