Fischer Panda 18 - Submenu Panel; Submenu Generator; Set up the Brightness of the CP-G

Panda xControl
Seite/Page 228 - Kaptitel/Chapter 11: Panda xControl 18.12.15
3. Service
the submenu „Service“ is a restricted area for Fischer Panda Staff.
4. Back
11.5.2 Submenu „Panel“
Fig. 11.5.2-1: Submenu „Panel“
11.5.3 Submenu „Generator“
Fig. 11.5.3-1: Submenu „Panel“In the submenu „Panel“ following points can be set up
1. Brightness of the panel
2. Contrast of the panel
3. Standby time out of the Panel
4. Standby brightness of the panel
5. Way of illustration (symbolic or text) of the overview
screens
6. Language of the text screens
7. Temperature unit (°C or °F)
8. Reset the panel submenu to standard
9. back to the main menu
11.5.3.1 Set up the brightness of the CP-G
Scroll with the „Step-up“/“Step-down“ buttons to the menu point „brightness“ and confirm with the „Start/Stop - Enter“
button. You enter the menu point brightness.