Maintenance Instructions
18.12.15 Kapitel/Chapter 7: Maintenance Instructions - Seite/Page 159
The capacitors should not be removed from the electrical cabinet before the check is made.
Checking the electrical connections to the Capacitor
It must be ensured that the electrical connections to the capacitor are always tight fitting. Loose connections with
transitional resistance can mean that the contact surfaces will become heated externally. This can lead to faster
deterioration of the capacitors.
7.17.1Replacing the Electric Starter
NOTE:Representative procedureThe described procedure is representative for Fischer Panda
generators. The original location of the item must be taken
from the generator description of this manual. All
replacements and repairs should be done by a trained
person.
ATTENTION!Ensure that the generator cannot be started up
accidentally. Remove battery main switch.
For part numbers, refer to the spare parts catalogue.
Fig. 7.17-1: Electric starter1. Open the capsule.
01. Electric starter
Fig. 7.17-2: Electric starter2. Pull off connector.
To Next Page
Loading...
