Flexim FLUXUS F60 Series - 12 Dismounting and Disposal; Dismounting; Disposal

12 Dismounting and disposal
FLUXUS F60* 12.1 Dismounting
119
UMFLUXUS_F60xV5-0EN, 2017-10-16
12 Dismounting and disposal
12.1 Dismounting
The dismounting is carried out in reverse order to its installation, see chapter 6.
12.2 Disposal
The measuring equipment has to be disposed in accordance to the applicable regula-
tions.
Depending on the material, the corresponding parts have to be disposed in residual or
special waste or recycled. For further information, contact FLEXIM.
Danger!
Risk of explosion when using the transmitter FLUXUS *608**-A2 in
explosive atmospheres
This may result in personal or material damage or other dangerous situa-
tions.
→ Observe the "Safety instructions for the use in explosive atmospheres",
see document SIFLUXUS_608.
Danger!
Risk of explosion when using the transmitter FLUXUS *608**-F2 in
explosive atmospheres
This may result in personal or material damage or other dangerous situa-
tions.
→ Observe the "
Safety instructions for the use in explosive atmospheres",
see document SIFLUXUS_608F2.