16 Data transmission
16.1 Online transmission FLUXUS F60*
2017-10-16, UMFLUXUSF60xV5-0EN
142
16 Data transmission
The data can be transmitted to a PC via the serial interface RS232 or RS485 (optional).
16.1 Online transmission
The data is directly transmitted during the measurement and can be sent to a terminal
program.
The data logger works independently of the online transmission.
16.2 Offline transmission
The data of the data logger is transmitted.
Selection of the serial interface for the offline transmission
• Select Special Funct.\SYSTEM settings\serial transmis.
• Press ENTER until Send Offline via is displayed.
Tab. 16.1: Overview of online transmission
serial interface transmission see
RS232 terminal program section 16.5
RS485 (emitter) terminal program section 16.5
It is recommended to use the RS485 interface for the online transmission of data.
The RS232 interface should only be used if the transmitter does not have an RS485
interface.
Tab. 16.2: Overview of offline transmission
serial interface transmission see
RS232 terminal program section 16.6
RS485 (emitter) terminal program section 16.6
Special Funct.\SYSTEM settings\serial transmis.
To Next Page
Loading...
Need help?
General
