5 Transport and storage
FLUXUS F60* 5.1 Transport
31
UMFLUXUS_F60xV5-0EN, 2017-10-16
5 Transport and storage
5.1 Transport
The measuring equipment must be packaged properly for transport, see section 2.7. For
weight indications of the transmitter and the transducers, see Technical specification.
5.2 Storage
The transmitter and the transducers have to be stored in a dry place.
When packaging, the transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring
equipment.
→ Secure the transmitter against falling during packaging. Wear the
required personal protective equipment. Observe the applicable rules.
When lifting, the center of gravity of the transmitter can be displaced
within the cardboard box. The transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring
equipment.
→ Secure the transmitter against falling during transport. Wear the
required personal protective equipment. Observe the applicable rules.
To Next Page
Loading...
Need help?
General
