Flexim FLUXUS F60 Series - Measurement with Activated Data Logger; Deletion of Measured Values; Information Relating the Data Logger

15 Data logger
15.4 Measurement with activated data logger FLUXUS F60*
2017-10-16, UMFLUXUSF60xV5-0EN
140
15.4 Measurement with activated data logger
• Start the measurement.
• Enter the number of the measuring point.
• Press ENTER.
If Output Options\Store Meas.Data is activated and Special Funct.\SYSTEM
settings\Ringbuffer is deactivated, an error message will be displayed as soon as
the data logger is full.
• Press ENTER.
The error message will be displayed periodically.
15.5 Deletion of measured values
• Select Special Funct.\Delete Meas.Val.
• Press ENTER.
• Select yes or no.
• Press ENTER.
15.6 Information relating the data logger
If the data logger is empty and a measurement is started with one physical quantity on
one measuring channel without storing the totalizer, approx. 100 000 measured values
can be stored. The available data logger can be displayed:
• Select Special Funct.\Instrum. Inform.
• Press ENTER.
Measuring\Channel\Meas.Point No.:
DATA MEMORY OVERFLOW!
Special Funct.\Delete Meas.Val.
Special Funct.\Delete Meas.Val.\Really Delete?
Special Funct.\Instrum. Inform.