8 Start-up
FLUXUS F60* 8.2 Switching on/off
75
UMFLUXUS_F60xV5-0EN, 2017-10-16
• Select yes if the transmitter is to be used in the region of Canada.
• Press ENTER.
This display will only be indicated if imperial is selected.
The current time is displayed.
• Press ENTER to confirm the time or to set the current time via the numeric field.
• Press ENTER.
The current date is displayed.
• Press ENTER to confirm the date or to set the current date via the numeric field.
• Press ENTER.
8.2 Switching on/off
Press key C to switch on the transmitter.
After switching on, it will be displayed which transducer has been detected at which mea-
suring channel.
Afterwards, the serial number of the transmitter is displayed for a short time. It is not pos-
sible to enter any data while the serial number is displayed.
Afterwards, the main menu is displayed in the default language. The language of the dis-
play can be set, see section 8.4.
Press key BRK 3 times to switch off the transmitter.
CANADA-REGION
TIME
DATE
To Next Page
Loading...
