Flexim FLUXUS F60 Series User Manual

15 Data logger
15.1 Activating/deactivating the data logger FLUXUS F60*
2017-10-16, UMFLUXUSF60xV5-0EN
136
15 Data logger
The transmitter has a data logger which stores the data during the measurement.
The following data will be stored:
• date
•time
• measuring point number
• pipe parameters
• fluid parameters
• transducer data
• sound path (reflection or diagonal arrangement)
• transducer distance
• damping factor
• storage rate
• physical quantity
• unit of measurement
• measured values (physical quantity and input quantities)
• values of the totalizers (in case the totalizers are activated)
• diagnostic values (in case the storing of diagnostic values is activated)
In order to store the data, the data logger has to be activated.
The available data logger can be displayed.
The storing of each measured value will be signalized acoustically. The acoustic signal
can be deactivated.
15.1 Activating/deactivating the data logger
• Select the channel for which the output is to be activated in the program branch
Output Options.
• Press ENTER.
• Press ENTER until Store Meas.Data is displayed. Select yes to activate the data
logger, no to deactivate it.
• Press ENTER.
Output Options\for Channel A:
Output Options\...\Store Meas.Data

Flexim FLUXUS F60 Series Specifications

General

Brand	Flexim
Model	FLUXUS F60 Series
Category	Measuring Instruments
Language	English