Flexim FLUXUS F60 Series User Manual

8 Start-up
8.1 Start-up settings FLUXUS F60*
2017-10-16, UMFLUXUSF60xV5-0EN
74
8 Start-up
8.1 Start-up settings
When starting up the transmitter for the first time, the following settings are required:
• language
• units of measurement
• time/date
These displays will only be indicated once when the transmitter is switched on for the first
time.
The available transmitter languages are displayed.
• Select a language.
• Press ENTER.
The menus are displayed in the selected language.
• Select metric or imperial.
• Press ENTER.
Danger!
Risk of explosion when using the transmitter FLUXUS *608**-A2 in
explosive atmospheres
This may result in personal or material damage or other dangerous situa-
tions.
→ Observe the "Safety instructions for the use in explosive atmospheres",
see document SIFLUXUS_608.
Danger!
Risk of explosion when using the transmitter FLUXUS *608**-F2 in
explosive atmospheres
This may result in personal or material damage or other dangerous situa-
tions.
→ Observe the "Safety instructions for the use in explosive atmospheres",
see document SIFLUXUS_608F2.
Select language
Engineer. Units

Flexim FLUXUS F60 Series Specifications

General

Brand	Flexim
Model	FLUXUS F60 Series
Category	Measuring Instruments
Language	English