To Next Page

To Previous Page

8 Start-up

FLUXUS F60* 8.4 HotCodes

UMFLUXUS_F60xV5-0EN, 2017-10-16

8.4 HotCodes

A HotCode is a digit sequence that activates certain functions and settings.

A HotCode can only be entered in the main menu immediately after the transmitter has

been switched on. The HotCode is not displayed during the input.

8.5 Language

The language can be selected with the following HotCodes:

When the last digit has been entered, the main menu is displayed in the selected lan-

guage.

The selected language remains activated when the transmitter is switched off and on

again. After an initialization of the transmitter, the language is reset to the default lan-

guage.

function HotCode deactivation

reset of the display to medium contrast 555000

language selection 9090xx

enabling the FastFood mode 007022 HotCode 007022

manual input of the lower limit for the inner pipe diameter 007001

activation of the SuperUser mode 071049 switching off the

transmitter

activation of the BTU mode 007025 HotCode 007025

change of the transmission parameters of the RS232

interface

232-0-

language HotCode

Dutch 909031

French 909033

Spanish 909034

English 909044

German 909049

Flexim FLUXUS F60 Series User Manual

Questions and Answers: