This document does not contain any export-controlled information.
Document Scope and Purpose
4
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Caution:
·
Do not drop the camera or subject it to physical shock.
·
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit
of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put
on the lens cap to protect the sensor from dirt.
·
Do not aim the camera lens at strong light, such as the sun or an incandescent lamp, which can
seriously damage the camera.
·
Make sure that the surface of the sensor is not exposed to a laser beam, which could burn out
the sensor.
·
If the camera will be fixed to a ceiling, verify that the ceiling can support more than 112 newtons
(112-N) of gravity, or over three times the camera’s weight.
·
The camera should be packed in its original packing if it is reshipped.
Caution:
To avoid damage from overheating or unit failure, assure that there is sufficient temperature regulation
to support the unit’s requirements (cooling/heating). Operating temperature should be kept within the
range specified by the camera's technical specifications.
Attention:
Afin d'éviter tout dommage dû à une surchauffe ou toute panne de l'unité, assurez-vous que la
régulation de température est suffisante pour répondre aux exigences de l'unité
(refroidissement/chauffage). La température de fonctionnement doit être maintenue dans l'intervalle
spécifié par les spécifications techniques de la camera.
To Next Page
Loading...
