FLIR Quasar Gen III CP-6302 Series - Factory Default Options and Software Version; Partial Restore and System Reboot; Current Software Version Display

This document does not contain any export-controlled information.
Configuration and Operation
56
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Note:
The IP address and all other settings will be restored to factory default settings.
Partial Restore
Click PARTIAL RESTORE to restore the factory default settings, but save the network settings. The
system restarts in 30 seconds.
Partial Restore Screen
Reboot
Click REBOOT to restart the system without changing current settings.
5.3.9.4 Software Version
The current version of the software is displayed in the Software Version screen.
Software Version Screen