This document does not contain any export-controlled information.
Configuration and Operation
26
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Click SAVE when finished.
IPv6 Address Configuration
To enable IPv6
1. Check Enable IPv6.
2. In the Address text box, enter the unit's IPv6 IP Address.
5.3.3.2 QoS
QoS (Quality of Service) provides differentiated service levels for different types of traffic packets and
guarantees delivery of priority services during periods of network congestion. Adapting the Differentiated
Services (DiffServ) model, traffic flows are classified and marked with DSCP (DiffServ Code point)
values, and as a result receive the corresponding forwarding treatment from DiffServ-capable routers.
DSCP configuration settings are entered in the System > Network > QOS screen:
QoS Screen
DSCP Settings
The DSCP value range is from 0 to 63. The default DSCP value is 0 (DSCP disabled). The camera uses
the following QoS classes: Video, Audio, and Management.
·
Video DSCP – This class consists of applications such as MJPEG over HTTP, RTP/RTSP and
RTSP/HTTP.
·
Audio DSCP – The camera supports audio.
·
Management DSCP – This class consists of HTTP traffic (web browsing).
Click SAVE when finished.
Note:
To enable this function, make sure the switches/routers in the network support QoS.
5.3.3.3 SNMP
The Simple Network Management Protocol (SNMP) enables the camera to be monitored and managed
remotely by the network management system. SNMP configuration settings are entered in the System >
Network > SNMP screen.
To Next Page
Loading...
Need help?
General
