This document does not contain any export-controlled information.
Overview
6
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
3 Overview
The Quasar Gen III CP-6302 Range Pan/Tilt/Zoom (PTZ) cameras provide real-time video with high-
definition quality at Full HD 1080p. The CP-6302 Range features gyro-based electronic image
stabilization, servo feedback for precise preset positioning at frames rates up to 50/60 fps, and True
Shutter Wide Dynamic Range at frames rates up to 25/30 fps. With 10x digital zoom, 30x optical zoom,
and high-speed PTZ functionality, the Quasar Gen III CP-6302 can quickly cover a wide monitoring area
with a high level of detail. The CP-6302-31-I model also features IR illumination up to 200 meters (656
feet)
Up to four streams can be run simultaneously with H.265, H.264 or MJPEG compression, providing an
ideal solution when differing levels of image quality are required. The camera can increase frame rate
and level of detail when events are triggered. In addition, FLIR's adaptive streaming algorithms provide
the highest image quality with the lowest bandwidth and storage requirements.
Caution:
If you are using FLIR’s Latitude VMS, we recommend that you configure the camera’s settings via the
AdminCenter. This is because the camera’s web-based interface might be overwritten by Latitude
settings. Refer to the Latitude online help for information regarding configuring camera settings.
Attention:
Si vous utilisez le logiciel de gestion de vidéo Latitude de FLIR, nous vous conseillons de configurer les
paramètres de la caméra via l'AdminCenter. En effet, l'interface Internet de la caméra peut être
remplacée par les paramètres Latitude. Veuillez consulter l'aide en ligne Latitude pour de plus amples
informations sur la configuration des paramètres de la caméra.
To Next Page
Loading...
Need help?
General
