This document does not contain any export-controlled information.
Configuration and Operation
17
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Details of these settings are specified in the following sections:
Note:
The System screen is accessible only by the Administrator.
5.3.1 System
The System screen is used for entering the camera’s friendly name and date and time settings. Click the
System tab in the sidebar. The System screen is displayed.
System Screen
The System screen includes the following fields:
Host Name
The host name is for camera identification. If the alarm function is enabled and is set to send an alarm
message by Mail or FTP, the host name entered here is displayed in the alarm message.
Time Zone
Select the time zone from the drop-down menu.
Enable Daylight Saving Time
To enable daylight saving time, check the box and then specify time offset (number of hours or minutes
difference between daylight saving time and standard time), start date and time for daylight saving time,
and end date and time for daylight saving time. The format for time offset is [hh:mm:ss]. For example, if
the amount of time offset is one hour, enter 01:00:00 in the field.
To Next Page
Loading...
Need help?
General
