EasyManua.ls Logo

FLIR Quasar Gen III CP-6302 Series - H.265 Video Compression Settings; H.265 Rate Control and Profiles

FLIR Quasar Gen III CP-6302 Series
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This document does not contain any export-controlled information.
Configuration and Operation
61
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Note:
1. The performance on Streams 2, 3, and 4 depends on the combination and settings of
each stream configured before it. For example, Stream 4 performance depends on the
settings for Streams 1, 2, and 3. Stream 3 performance depends on the settings for
Streams 1 and 2.
2. The maximum frame rate on Streams 2, 3, and 4 also depends on the selection of WDR
2 Shutter (PAL) or WDR 2 Shutter (NTSC) for maximum 25/30 frames per second, or
50 fps (PAL) or 60 fps (NTSC) for maximum 50/60 frames per second from the Camera
> Misc. screen.
3. Images can be sent by FTP or email only when MJPEG steaming is selected as one of
the streams.
4. United VMS supports only three streams.
5.5.1.1.1 Single-Stream H.265
To implement single-stream H.265 compression
1. In the Stream 1 section, from the Encode Type drop-down menu, select H.265. The section
expands. The following options are available if you select CBR Rate Control:
H.264/H.265 with CBR Rate Control
The following options are available if you select VBR Rate Control:
H.264/H.265 with VBR Rate Control
The following options are available if you select LBR Rate Control and disable Dynamic GOV:
H.264/H.265 with LBR Rate Control
The following options are available if you select LBR Rate Control and enable Dynamic GOV:
H.264/H.265 with LBR Rate Control and Dynamic GOV

Table of Contents

Related product manuals