FLIR Quasar Gen III CP-6302 Series User Manual

This document does not contain any export-controlled information.
Configuration and Operation
12
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
5 Configuration and Operation
The Quasar Gen III CP-6302 camera is provided with a browser-based configuration interface for video
playback and recording. This section includes the following information:
· Browser-Based Viewer Introduction
· Live Screen
· System Tab
· Streaming Tab
· PTZ Tab
· Logout
Additionally, if FLIR’s Latitude VMS is used, many of the configurations and features of FLIR’s VMS
provide configuration and automation of the camera.
5.1 Browser-Based Viewer Introduction
The figure below illustrates the camera’s browser-based user interface.
Browser-Based User Interface
The user interface displays the following information:
1. The Navigation Bar is displayed in the center of the screen containing Live and Settings buttons.
· Live Button
The Live screen opens by default when the camera logs on. It is used to monitor live video
of the targeted area, adjust the display size, take snapshots of the view area, stop/start
video streaming, record video in a designated file location, activate or de-activate a
loudspeaker (audio function), and to perform a digital zoom. An explanation of the items on
the screen is included below and in the Live Screen section.

FLIR Quasar Gen III CP-6302 Series Specifications

General

Brand	FLIR
Model	Quasar Gen III CP-6302 Series
Category	Digital Camera
Language	English