This document does not contain any export-controlled information.
Configuration and Operation
30
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
5.3.3.6 Mail
Simple Mail Transfer Protocol (SMTP) is a protocol for sending e-mail messages between servers. It is a
relatively simple, text-based protocol, where a text message is transferred to one or more specified
recipients. The Administrator can send an e-mail via Simple Mail Transfer Protocol (SMTP) when an
alarm is triggered. E-mail notifications are set by selecting the checkbox for an e-mail-related triggered
action on the IO, Network Failure Detection, and Motion Detection screens.
SMTP (E-mail) server configuration settings are entered in the System > Network > Mail screen:
Mail Screen – SMTP
Two SMTP server accounts can be configured with or without SSL encryption. Enter the settings for the
1
st
SMTP server and 2
nd
SMTP server in the appropriate fields. Settings include SMTP server, server
port (the default port is 25), account name, password, and recipient e-mail address settings. To encrypt e-
mail with SSL, select the 1
st
SMTP SSL and/or 2
nd
SMTP SSL checkbox. For SMTP server details,
contact your network service provider.
Click SAVE when finished.
5.3.3.7 FTP
The Administrator can send an alarm message to one or two File Transfer Protocol (FTP) sites when
motion is detected. FTP notifications are set by selecting the checkbox for an FTP-related triggered
action on the IO, Network Failure Detection, and Motion Detection screens.
To Next Page
Loading...
Need help?
General
