This document does not contain any export-controlled information.
Configuration and Operation
49
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
In the Recording Storage section, select the recording device: SD Card or Network Share.
Note:
It is not recommend to record with the microSD/SDXC card for 24/7 continuously, as it may not be able
to support long term continuous data read/write. Contact the manufacturer of the microSD card for
information regarding its reliability and life expectancy.
In the Recording Schedule section, specify the recording schedule. Select one of three options:
·
Disable – Disable this function
·
Always – Always use this function
·
Only during time frame – Records only during a specified time frame
To set the recording schedule
1. Select the day.
2. Set the start time.
3. Set the duration for recording.
4. Click SAVE to confirm the schedule. The schedule is displayed in the table.
Note:
This option works only if (a) the microSD/SDXC card is installed in the camera or (b) the NAS
is configured properly.
5.3.6 Motion Detection
The motion detection function detects suspicious motion and triggers alarms when motion volume in the
detected region reaches or exceeds the determined sensitivity threshold value. The Live View pane on
the Motion Detection screen is used for creating motion detection regions and indicating motion
detection. It is possible to define up to four motion detection regions within the Live View pane. The
motion detection function is disabled by default.
To Next Page
Loading...
Need help?
General
