This document does not contain any export-controlled information.
Configuration and Operation
87
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Stabilizer and Shutter (True) WDR. The unit's frame rate is 25/30 fps in this mode.The default
setting is WDR 2 Shutter (NTSC).
Misc. Screen with True (Multi-Shutter )WDR Enabled
Note:
After changing the TV Setting, the camera resets automatically. Refresh the page to view the new
setting. There is no need to log in again.
Digital Zoom
The camera’s digital zoom is adjustable from x1 to x30. Select Off or On. The default setting is Off. The
setting is applied automatically.
Image Stabilizer
The image stabilizer keeps the image steady and suppresses effects caused by external vibration. Keep
the camera still for 3 seconds to ensure calibration accuracy.
From the Stabilizer drop-down menu, select On to activate the Stabilizer or Off to disable it. The default
setting is Off. The setting is applied automatically.
From the Auto Calibration drop-down menu, select On to activate Auto Calibration or Off to disable it.
Auto calibration automatically calibrates the camera when it detects a deviation of dome pivot. The
camera constantly aligns itself against vertical and horizontal checkpoints to maintain accurate operation.
The default setting is On. Click SET to calibrate the unit.
Note:
1. Do NOT use PTZ functions when activating manual calibration.
2. The Digital Zoom function and the Zoom Factor function on the Privacy Mask screen are
disabled when the Stabilizer is set to Off.
3. When image stabilization is enabled, the video image will be slightly cropped. This is part of the
stabilization algorithm as it is processing the image.
TV System Settings
From the drop-down menu, select the video system setting. The setting is applied automatically.
·
60 fps (NTSC)
·
50 fps (PAL)
·
WDR 2 Shutter (NTSC) – default setting
·
WDR 2 Shutter (PAL)
To Next Page
Loading...
