Fluke Calibration 5322A - Set the Date; Set the User Interface Language; View the Device Information

5322A
Operators Manual
30
Set the Date
To set the date:
1. After you enter the setup menu, push  or  or turn the rotary knob to
highlight Date in the list of setup selections.
2. Push the Select softkey or push in the rotary knob.
3. Use  or  to position the cursor on the least significant digit of the year,
month or day. The cursor only rests on the least significant digit.
The format of the date is dd/mm/yyyy.
4. Use the  or  or rotate the rotary knob to change the date element.
5. Push the Exit softkey to accept the date and exit the date setting function.
Set the User Interface Language
To set the language:
1. After entering the setup menu, push  or  or turn the rotary knob to
highlight Language in the list of setup selections.
2. Push the Select softkey or push in the rotary knob.
3. Select the preferred language from the list.
4. Push the Select softkey or push in the rotary knob.
5. Push the Exit softkey.
View the Device Information
To view Product information (serial number, software versions, and installed
options):
1. After entering the setup menu, push  or  or turn the rotary knob to
highlight Device Information in the list of setup selections.
2. Push the Select softkey or push in the rotary knob.
3. After viewing the information, push the Exit softkey.