Multifunction Electrical Tester Calibrator
Supported SCPI Commands
89
Numeric Output Format
When the Product is queried and a value is returned, the Product formats the
numerical value in standard exponential format. For example, 40 mA is output as
40e-03.
Supported SCPI Commands
This section explains the SCPI (Standard Commands for Programmable
Instruments) commands available to program the Product. This section includes:
• A list of the supported SCPI commands
• A discussion of how to use the command set
• A detailed description of each command in the set
Note
These conventions are used for SCPI command syntax:
• Square brackets ( [ ] ) indicate optional keywords or parameters.
• Braces ( { } ) enclose parameters within a command string.
• Triangle brackets ( < > ) indicate that you must substitute a value
for the enclosed parameter.
• Capital letters indicate the abbreviated form of a command and
are required while lowercase letters are optional.
To Next Page
Loading...
