1
Introduction
This manual documents operating instructions and other information for these
four Products:
• 5322A Multifunction Electrical Tester Calibrator
• 5322A/5 Multifunction Electrical Tester Calibrator with 5 kV Insulation
Resistance
• 5322A/VLC Multifunction Electrical Tester Calibrator with 600 V Source and
Active Loop Compensation
• 5322A/5/VLC Electrical Tester Calibrator with 5 kV Insulation Resistance and
600 V Source and Active Loop Compensation
Where necessary, the text is specific to each of these Products. Otherwise, the
manual applies to each Product. Through the manual, all varieties of the 5322A
will be referred to as the Product or Calibrator. Use all Products to calibrate and
test electrical safety testers.
Some examples of these testers are:
• Megohmmeters
• Ground bond testers
• Loop testers
• RCD (Residual Current Device testers)
• Appliance testers
• Electrical installation testers
• Earth resistance meters
• High voltage safety testers (Hipots)
To Next Page
Loading...
