Fluke OMNIScanner 2 - Chapter 10 - Updating Scanner Software; Downloading Software from the WWW site; Updating OMNISCANNER and OMNIREMOTE Software

10 - 1
OMNISCANNER User Guide
Chapter 10 - Updating Scanner Soft-
ware
Downloading Software from the WWW site
Software updates can be easily downloaded from the Fluke Networks
World Wide Web site. If you are connected to the Internet, you can
access our web site by entering http://www.flukenetworks.com/support
in the URL address field.
Select the file you need by clicking on it, and then save it to the hard
disk.
Execute the downloaded .exe file to extract the software update.
Note
To ensure compatibility, always update the OMNISCANNER software
together with the Scanlink
©
Tools software.
Updating OMNISCANNER and OMNIREMOTE Software
Note
The update process will erase all test results stored in memory. Use
Scanlink to upload the results before updating OMNISCANNER’s soft-
ware.
To update OMNISCANNER with the files you have downloaded from the
WWW to your PC proceed as follows:
1. Connect the DB-9 end of the serial cable to OMNISCANNER’s serial port,
and then connect the DB-9 or DB-25 end of the serial cable to your PC’s
serial port.
2. Plug the AC adapter into OMNISCANNER.
3. Connect OMNISCANNER and OMNIREMOTE using the provided test cable
and adapter.