Fluke OMNIScanner 2 - Fiber Adapter Info; Format MMC; Regional Settings

4 - 15
OMNISCANNER User Guide
Fiber Adapter Info
Select Fiber Info to display the FIBER INFO
screen.
The Serial numbers and the date the adapters
were last factory calibrated is displayed.
The currently used reference method(s) are
displayed on the bottom of the screen.
Press ESC to return to the SETUP screen.
Format MMC
When using the MultiMediaCard for the first time,
it may require formatting.
Insert the MMC into OMNISCANNER2’s MMC slot.
Select Format MMC to open the FORMAT MMC
screen. Formatting will start immediately.
The formatting time is dependent on the capacity
of the MultiMediaCard, 8MB will require 2 min-
utes.
Regional Settings
Select Regional Settings to open the REGIONAL screen. The settings
affect the way OMNISCANNER displays dates and numbers.
The REGIONAL screen displays the Language
that is currently selected. To change the language,
press ENTER and use the éê keys to highlight a
language. Press ENTER once more to select it as
the default language.
Use the è to advance to the Units: field. Press
ENTER to switch the units from Meters to Feet.
Use the éê keys to highlight the desired mea-
surement unit and press ENTER to select it as the
default measurement.