OMNISCANNER User Guide
7 - 2
Press (Edit) to move the Autotest to another project or to
change the Circuit ID.
Press ENTER with the Project: highlighted to
reveal a list of all projects that are currently
stored. Use the éê to highlight the project you
want to store the Autotest within, and press
ENTER to select it.
Use the ê to highlight the Circuit ID: and press
ENTER to edit the field. Press ENTER to terminate
the edit mode.
Press (Save) to save the changes and return to the PROJECT
NAME screen. If the PROJECT NAME was changed, it will now appear in
the title bar together with the numeric test counter.
Viewing Autotest Results
The Project Name screen shows a Circuit ID and a PASS/FAIL icon for
each saved Autotest. The following PASS/FAIL icons can be displayed:
Passed twisted pair Autotest.
Failed twisted pair Autotest.
Twisted Pair Autotest without PASS/FAIL
criteria.
Passed twisted pair Autotest with graphs.
Failed twisted pair Autotest with graphs.
Twisted pair Autotest with graphs without
PASS/FAIL criteria.
Passed fiber Autotest.
Failed fiber Autotest.
Fiber Autotest without PASS/FAIL criteria.
Coax test result
To Next Page
Loading...
