OMNISCANNER User Guide
4 - 14
Adapter Usage
Select Adapter Usage to display the ADAPTER
USAGE screen.
The number of Autotests that have been per-
formed with the Adapter that is currently at-
tached to OMNI: and Remote: is displayed below
each adapter’s name (Adapter ID String).
Press ESC to return to the SETUP screen.
Remote Info
Select Remote Info to display the REMOTE INFO screen.
The date the Reference value for OMNISCANNER and OMNIREMOTE was
last set is shown at the top of the screen.
The Hardware and Software Versions, and the Serial number of
the remote unit are displayed.
The Battery status is represented with a gauge.
Factory Calibration* data is displayed at the
bottom of the screen.
You may need to provide Serial Number and
Factory Calibration data when having repairs or
refurbishments done, or when calling for Techni-
cal Support.
Press ESC to return to the SETUP screen.
*OMNISCANNER and OMNIREMOTE should be calibrated annually with
specialized equipment. Contact Technical Support for information on
calibration and service requirements.
To Next Page
Loading...
